TOP(サイトマップ) |
KEY,ASC,ASCQ情報 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
(はじめに) はじめに Solarisって・・・ SunのセミナーとSDC Solaris 10概要 資格(SCSA,SCNA) Solarisフォーラム 管理人に連絡 (Solaris基本) Solarisのインストール システムの起動と停止 ファイルシステム オートマウントとマウント パッケージとパッチ ユーザの追加と削除 ファイル権限(セキュリティ) バックアップとリストア CDE環境 プロセス管理/監視 (ネットワーク管理) OSIを理解してみる TCP/IPの設定 (TCP/IP入門) DNSの設定 NISの設定 NFSの設定(WebNFS,CacheFS) (NIS、NIS+、DNS違い) DHCPの設定 1つのNICで複数IP設定 (IO関連) インタフェース概要 SAFの管理 プリンタ管理概要 プリンタコマンド SunSolve Online SCSI情報(KEY,ASC,ASCQ) (ソフトウェア関連) Bash Apache Solstice DiskSuite (SDS OSミラー回復) Veritas VxVM (OBPについて) PROM(OBP)の概要 OBPでのキーボード操作 一般的なOBPコマンド SolarisでOBPの設定 OBPに関するFAQ (トラブル時の対応) 基本情報 エラーメッセージ (主要メッセージ一覧) 性能関連コマンド トレースコマンド クラッシュダンプ SunSolve Online (その他) 小技集 UNIXコマンド (manマニュアル) システムチューニング ネットワークチューニング UltraSPARC T1について (FAQ) rootのPASSが不明 ハングアップかな? ハードトラブル OSが起動しない(b) swap領域の拡張方法 (リンク) Sun関連リンク その他リンク アバウトなJava入門 Perlメモ(逆引き用 |
SCSIのASC、ASCQについてSCSIの詳細については、インターネットを探してもなかなかありません。実は書籍でも本屋では売ってないので以下の本などはネットで購入するしかないかもしれません。もしくは本屋で発注してもらうか・・・。お勧めの書籍です。
|
値(16進数) | 意味(内容) |
0x00 | NO_SENSE |
0x01 | RECOVERED_ERROR |
0x02 | NOT_READY |
0x03 | MEDIUM_ERROR |
0x04 | HARDWARE_ERROR |
0x05 | ILLEGAL_REQUEST |
0x06 | UNIT_ATTENTION |
0x07 | DATA_PROTECT |
0x08 | BLANK_CHECK |
0x0a | COPY_ABORTED |
0x0b | ABORTED_COMMAND |
0x0e | MISCOMPARE |
ASC | ASCQ | 内容 |
00 | 00 | NO ADDITIONAL SENSE INFORMATION |
00 | 01 | FILEMARK DETECTED |
00 | 02 | END-OF-PARTITION/MEDIUM DETECTED |
00 | 03 | SETMARK DETECTED |
00 | 04 | BEGINNING-OF-PARTITION/MEDIUM DETECTED |
00 | 05 | END-OF-DATA DETECTED |
00 | 06 | I/O PROCESS TERMINATED |
00 | 11 | AUDIO PLAY OPERATION IN PROGRESS |
00 | 12 | AUDIO PLAY OPERATION PAUSED |
00 | 13 | AUDIO PLAY OPERATION SUCCESSFULLY COMPLETED |
00 | 14 | AUDIO PLAY OPERATION STOPPED DUE TO ERROR |
00 | 15 | NO CURRENT AUDIO STATUS TO RETURN |
00 | 16 | operation in progress |
00 | 17 | cleaning requested |
00 | 18 | erase operation in progress |
00 | 19 | locate operation in progress |
00 | 1A | rewind operation in progress |
00 | 1B | set capacity operation in progress |
00 | 1C | verify operation in progress |
01 | 00 | NO INDEX/SECTOR SIGNAL |
02 | 00 | NO SEEK COMPLETE |
03 | 00 | PERIPHERAL DEVICE WRITE FAULT |
03 | 01 | NO WRITE CURRENT |
03 | 02 | EXCESSIVE WRITE ERRORS |
04 | 00 | LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE |
04 | 01 | LOGICAL UNIT IS IN PROCESS OF BECOMING READY |
04 | 02 | LOGICAL UNIT NOT READY, INITIALIZING COMMAND REQUIRED |
04 | 03 | LOGICAL UNIT NOT READY, MANUAL INTERVENTION REQUIRED |
04 | 04 | LOGICAL UNIT NOT READY, FORMAT IN PROGRESS |
04 | 05 | LUN not ready, rebuild in progress |
04 | 06 | LUN not ready, recalculation in progress |
04 | 07 | LUN not ready, operation in progress |
04 | 08 | LUN not ready, long write in progress |
04 | 09 | LUN not ready, self-test in progress |
04 | 0A | LUN not accessible, asymmetric access state transition |
04 | 0B | LUN not accessible, target port in standby state |
04 | 0C | LUN not accessible, target port in unavailable state |
04 | 10 | LUN not ready, auxiliary memory not accessible |
04 | 82 | I/O PORT IS EXTENDED |
04 | 83 | FFRONT DOOR IS OPEN |
04 | 85 | FFRONT DOOR IS OPEN |
04 | 86 | Source Magazine not installed. |
05 | 00 | LOGICAL UNIT DOES NOT RESPOND TO SELECTION |
06 | 00 | REFERENCE POSITION FOUND |
07 | 00 | MULTIPLE PERIPHERAL DEVICES SELECTED |
08 | 00 | LOGICAL UNIT COMMUNICATION FAILURE |
08 | 01 | LOGICAL UNIT COMMUNICATION TIME-OUT |
08 | 02 | LOGICAL UNIT COMMUNICATION PARITY ERROR |
08 | 03 | LUN communication crc error (ultra-DMA/32) |
08 | 04 | unreachable copy target |
09 | 00 | TRACK FOLLOWING ERROR |
09 | 01 | TRA CKING SERVO FAILURE |
09 | 02 | FOC US SERVO FAILURE |
09 | 03 | SPI NDLE SERVO FAILURE |
09 | 04 | head select fault |
0A | 00 | ERROR LOG OVERFLOW |
0B | 00 | warning |
0B | 01 | warning - specified temperature exceeded |
0B | 02 | warning - enclosure degraded |
0C | 00 | WRITE ERROR |
0C | 01 | WRITE ERROR RECOVERED WITH AUTO REALLOCATION |
0C | 02 | WRITE ERROR - AUTO REALLOCATION FAILED |
0C | 03 | write error - recommend reassignment |
0C | 04 | compression check miscompare error |
0C | 05 | data expansion occurred during compression |
0C | 06 | block not compressible |
0C | 07 | write error - recovery needed |
0C | 08 | write error - recovery failed |
0C | 09 | write error - loss of streaming |
0C | 0A | write error - padding blocks added |
0C | 0B | auxiliary memory write error |
0C | 0C | write error - unexpected unsolicited data |
0C | 0D | write error - not enough unsolicited data |
0D | 00 | error detected by third party temporary initiator |
0D | 01 | third party device failure |
0D | 02 | copy target device not reachable |
0D | 03 | incorrect copy target device type |
0D | 04 | copy target device data underrun |
0D | 05 | copy target device data overrun |
0E | 00 | invalid information unit |
0E | 01 | information unit too short |
0E | 02 | information unit too long |
10 | 00 | ID CRC OR ECC ERROR |
11 | 00 | UNRECOVERED READ ERROR |
11 | 01 | READ RETRIES EXHAUSTED |
11 | 02 | ERROR TOO LONG TO CORRECT |
11 | 03 | MULTIPLE READ ERRORS |
11 | 04 | UNRECOVERED READ ERROR - AUTO REALLOCATE FAILED |
11 | 05 | L-EC UNCORRECTABLE ERROR |
11 | 06 | CIRC UNRECOVERED ERROR |
11 | 07 | DATA RESYCHRONIZATION ERROR |
11 | 08 | INCOMPLETE BLOCK READ |
11 | 09 | NO GAP FOUND |
11 | 0A | MISCORRECTED ERROR |
11 | 0B | UNRECOVERED READ ERROR - RECOMMEND REASSIGNMENT |
11 | 0C | UNRECOVERED READ ERROR - RECOMMEND REWRITE THE DATA |
11 | 0D | de-compression crc error |
11 | 0E | cannot decompress using declared algorithm |
11 | 0F | error reading UPC/EAN number |
11 | 10 | error reading ISRC number |
11 | 11 | read error - loss of streaming |
11 | 12 | auxiliary memory read error |
11 | 13 | read error - failed retransmission request |
12 | 00 | ADDRESS MARK NOT FOUND FOR ID FIELD |
13 | 00 | ADDRESS MARK NOT FOUND FOR DATA FIELD |
14 | 00 | RECORDED ENTITY NOT FOUND |
14 | 01 | RECORD NOT FOUND |
14 | 02 | FILEMARK OR SETMARK NOT FOUND |
14 | 03 | END-OF-DATA NOT FOUND |
14 | 04 | block sequence error |
14 | 05 | record not found - recommend reassignment |
14 | 06 | record not found - data auto-reallocated |
14 | 07 | locate operation failure |
15 | 00 | RANDOM POSITIONING ERROR |
15 | 01 | MECHANICAL POSITIONING ERROR |
15 | 02 | POSITIONING ERROR DETECTED BY READ OF MEDIUM |
16 | 00 | DATA SYNCHRONIZATION MARK ERROR |
16 | 01 | data sync error - data rewritten |
16 | 02 | data sync error - recommend rewrite |
16 | 03 | data sync error - data auto-reallocated |
16 | 04 | data sync error - recommend reassignment |
17 | 00 | RECOVERED DATA WITH NO ERROR CORRECTION APPLIED |
17 | 01 | RECOVERED DATA WITH RETRIES |
17 | 02 | RECOVERED DATA WITH POSITIVE HEAD OFFSET |
17 | 03 | RECOVERED DATA WITH NEGATIVE HEAD OFFSET |
17 | 04 | RECOVERED DATA WITH RETRIES AND/OR CIRC APPLIED |
17 | 05 | RECOVERED DATA USING PREVIOUS SECTOR ID |
17 | 06 | RECOVERED DATA WITHOUT ECC - DATA AUTO-REALLOCATED |
17 | 07 | RECOVERED DATA WITHOUT ECC - RECOMMEND REASSIGNMENT |
17 | 08 | RECOVERED DATA WITHOUT ECC - RECOMMEND REWRITE |
17 | 09 | recovered data without ECC - data rewritten |
18 | 00 | RECOVERED DATA WITH ERROR CORRECTION APPLIED |
18 | 01 | RECOVERED DATA WITH ERROR CORRECTION & RETRIES APPLIED |
18 | 02 | RECOVERED DATA - DATA AUTO-REALLOCATED |
18 | 03 | RECOVERED DATA WITH CIRC |
18 | 04 | RECOVERED DATA WITH LEC |
18 | 05 | RECOVERED DATA - RECOMMEND REASSIGNMENT |
18 | 06 | RECOVERED DATA - RECOMMEND REWRITE |
18 | 07 | recovered data with ECC - data rewritten |
18 | 08 | recovered data with linking |
19 | 00 | DEFECT LIST ERROR |
19 | 01 | DEFECT LIST NOT AVAILABLE |
19 | 02 | DEFECT LIST ERROR IN PRIMARY LIST |
19 | 03 | DEFECT LIST ERROR IN GROWN LIST |
1A | 00 | PARAMETER LIST LENGTH ERROR |
1B | 00 | SYNCHRONOUS DATA TRANSFER ERROR |
1C | 00 | DEFECT LIST NOT FOUND |
1C | 01 | PRIMARY DEFECT LIST NOT FOUND |
1C | 02 | GROWN DEFECT LIST NOT FOUND |
1D | 00 | MISCOMPARE DURING VERIFY OPERATION |
1E | 00 | RECOVERED ID WITH ECC |
1F | 00 | partial defect list transfer |
20 | 00 | INVALID COMMAND OPERATION CODE |
20 | 01 | access denied - initiator pending-enrolled |
20 | 02 | access denied - no access rights |
20 | 03 | access denied - invalid mgmt id key |
20 | 04 | illegal command while in write capable state |
20 | 06 | illegal command while in explicit address mode |
20 | 07 | illegal command while in implicit address mode |
20 | 08 | access denied - enrollment conflict |
20 | 09 | access denied - invalid lu identifier |
20 | 0A | access denied - invalid proxy token |
20 | 0B | access denied - ACL LUN conflict |
21 | 00 | LOGICAL BLOCK ADDRESS OUT OF RANGE |
21 | 01 | INVALID ELEMENT ADDRESS |
21 | 02 | illegal function |
22 | 00 | ILLEGAL FUNCTION (SHOULD USE 20 00, 24 00, OR 26 00) |
24 | 00 | INVALID FIELD IN CDB |
24 | 01 | cdb decryption error |
25 | 00 | LOGICAL UNIT NOT SUPPORTED |
26 | 00 | INVALID FIELD IN PARAMETER LIST |
26 | 01 | PARAMETER NOT SUPPORTED |
26 | 02 | PARAMETER VALUE INVALID |
26 | 03 | THRESHOLD PARAMETERS NOT SUPPORTED |
26 | 04 | invalid release of persistent reservation |
26 | 05 | data decryption error |
26 | 06 | too many target descriptors |
26 | 07 | unsupported target descriptor type code |
26 | 08 | too many segment descriptors |
26 | 09 | unsupported segment descriptor type code |
26 | 0A | unexpected inexact segment |
26 | 0B | inline data length exceeded |
26 | 0C | invalid operation for copy source or destination |
26 | 0D | copy segment granularity violation |
27 | 00 | WRITE PROTECTED |
27 | 01 | hardware write protected |
27 | 02 | LUN software write protected |
27 | 03 | associated write protect |
27 | 04 | persistent write protect |
27 | 05 | permanent write protect |
27 | 06 | conditional write protect |
28 | 00 | NOT READY TO READY TRANSITION(MEDIUM MAY HAVE CHANGED) |
28 | 01 | IMPORT OR EXPORT ELEMENT ACCESSED |
29 | 00 | POWER ON, RESET, OR BUS DEVICE RESET OCCURRED |
29 | 01 | power on occurred |
29 | 02 | scsi bus reset occurred |
29 | 03 | bus device reset message occurred |
29 | 04 | device internal reset |
29 | 05 | transceiver mode changed to single-ended |
29 | 06 | transceiver mode changed to LVD |
29 | 07 | i_t nexus loss occurred |
2A | 00 | PARAMETERS CHANGED |
2A | 01 | MODE PARAMETERS CHANGED |
2A | 02 | LOG PARAMETERS CHANGED |
2A | 03 | reservations preempted |
2A | 04 | reservations released |
2A | 05 | registrations preempted |
2A | 06 | asymmetric access state changed |
2A | 07 | implicit asymmetric access state transition failed |
2B | 00 | COPY CANNOT EXECUTE SINCE HOST CANNOT DISCONNECT |
2C | 00 | COMMAND SEQUENCE ERROR |
2C | 01 | TOO MANY WINDOWS SPECIFIED |
2C | 02 | INVALID COMBINATION OF WINDOWS SPECIFIED |
2C | 03 | current program area is not empty |
2C | 04 | current program area is empty |
2C | 06 | persistent prevent conflict |
2C | 07 | previous busy status |
2C | 08 | previous task set full status |
2C | 09 | previous reservation conflict status |
2D | 00 | OVERWRITE ERROR ON UPDATE IN PLACE |
2F | 00 | COMMANDS CLEARED BY ANOTHER INITIATOR |
30 | 00 | INCOMPATIBLE MEDIUM INSTALLED |
30 | 01 | CANNOT READ MEDIUM - UNKNOWN FORMAT |
30 | 02 | CANNOT READ MEDIUM - INCOMPATIBLE FORMAT |
30 | 03 | CLEANING CARTRIDGE INSTALLED |
30 | 04 | cannot write medium - unknown format |
30 | 05 | cannot write medium - incompatible format |
30 | 06 | cannot format medium - incompatible medium |
30 | 07 | cleaning failure |
30 | 08 | cannot write - application code mismatch |
30 | 09 | current session not fixated for append |
30 | 10 | medium not formatted |
31 | 00 | MEDIUM FORMAT CORRUPTED |
31 | 01 | FORMAT COMMAND FAILED |
31 | 02 | zoned formatting failed due to spare linking |
32 | 00 | NO DEFECT SPARE LOCATION AVAILABLE |
32 | 01 | DEFECT LIST UPDATE FAILURE |
33 | 00 | TAPE LENGTH ERROR |
34 | 00 | enclosure failure |
35 | 00 | enclosure services failure |
35 | 01 | unsupported enclosure function |
35 | 02 | enclosure services unavailable |
35 | 03 | enclosure services transfer failure |
35 | 04 | enclosure services transfer refused |
36 | 00 | RIBBON, INK, OR TONER FAILURE |
37 | 00 | ROUNDED PARAMETER |
39 | 00 | SAVING PARAMETERS NOT SUPPORTED |
3A | 00 | MEDIUM NOT PRESENT |
3A | 01 | medium not present - tray closed |
3A | 02 | medium not present - tray open |
3A | 03 | medium not present - loadable |
3A | 04 | medium not present - medium auxiliary memory accessible |
3B | 00 | SEQUENTIAL POSITIONING ERROR |
3B | 01 | TAPE POSITION ERROR AT BEGINNING-OF-MEDIUM |
3B | 02 | TAPE POSITION ERROR AT END-OF-MEDIUM |
3B | 03 | TAPE OR ELECTRONIC VERTICAL FORMS UNIT NOT READY |
3B | 04 | SLEW FAILURE |
3B | 05 | PAPER JAM |
3B | 06 | FAILED TO SENSE TOP-OF-FORM |
3B | 07 | FAILED TO SENSE BOTTOM-OF-FORM |
3B | 08 | REPOSITION ERROR |
3B | 09 | READ PAST END OF MEDIUM |
3B | 0A | READ PAST BEGINNING OF MEDIUM |
3B | 0B | POSITION PAST END OF MEDIUM |
3B | 0C | POSITION PAST BEGINNING OF MEDIUM |
3B | 0D | MEDIUM DESTINATION ELEMENT FULL |
3B | 0E | MEDIUM SOURCE ELEMENT EMPTY |
3B | 0F | end of medium reached |
3B | 11 | medium magazine not accessible |
3B | 12 | medium magazine removed |
3B | 13 | medium magazine inserted |
3B | 14 | medium magazine locked |
3B | 15 | medium magazine unlocked |
3B | 16 | mechanical positioning or changer error |
3B | 83 | Tape is not ejected from drive. |
3B | 90 | TAPE IS NOT EJECTED FORM DRIVE |
3D | 00 | INVALID BITS IN IDENTIFY MESSAGE |
3E | 00 | LOGICAL UNIT HAS NOT SELF-CONFIGURED YET |
3E | 01 | LUN failure |
3E | 02 | timeout on LUN |
3E | 03 | LUN failed self-test |
3E | 04 | LUN unable to update self-test log |
3F | 00 | TARGET OPERATING CONDITIONS HAVE CHANGED |
3F | 01 | MICROCODE HAS BEEN CHANGED |
3F | 02 | CHANGED OPERATING DEFINITION |
3F | 03 | INQUIRY DATA HAS CHANGED |
3F | 04 | component device attached |
3F | 05 | device identifier changed |
3F | 06 | redundancy group created or modified |
3F | 07 | redundancy group deleted |
3F | 08 | spare created or modified |
3F | 09 | spare deleted |
3F | 0A | volume set created or modified |
3F | 0B | volume set deleted |
3F | 0C | volume set deassigned |
3F | 0D | volume set reassigned |
3F | 0E | reported LUNs data has changed |
3F | 0F | echo buffer overwritten |
3F | 10 | medium loadable |
3F | 11 | medium auxiliary memory accessible |
40 | 00 | RAM FAILURE |
40 | -- | DIAGNOSTIC FAILURE ON COMPONENT -- |
41 | 00 | DATA PATH FAILURE |
42 | 00 | POWER-ON OR SELF-TEST FAILURE |
43 | 00 | MESSAGE ERROR |
44 | 00 | INTERNAL TARGET FAILURE |
45 | 00 | SELECT OR RESELECT FAILURE |
46 | 00 | UNSUCCESSFUL SOFT RESET |
47 | 00 | SCSI PARITY ERROR |
47 | 01 | data phase crc error detected |
47 | 02 | scsi parity error detected during st data phase |
47 | 03 | information unit iucrc error detected |
47 | 04 | asynchronous information protection error detected |
47 | 05 | protocol service crc error |
47 | 7F | some commands cleared by iscsi protocol event |
48 | 00 | INITIATOR DETECTED ERROR MESSAGE RECEIVED |
49 | 00 | INVALID MESSAGE ERROR |
4A | 00 | COMMAND PHASE ERROR |
4B | 00 | DATA PHASE ERROR |
4B | 01 | invalid target port transfer tag received |
4B | 02 | too much write data |
4B | 03 | ack/nak timeout |
4B | 04 | nak received |
4B | 05 | data offset error |
4C | 00 | LOGICAL UNIT FAILED SELF-CONFIGURATION |
4D | 00 | tagged overlapped commands (ASCQ = queue tag) |
4E | 00 | OVERLAPPED COMMANDS ATTEMPTED |
50 | 00 | WRITE APPEND ERROR |
50 | 01 | WRITE APPEND POSITION ERROR |
50 | 02 | POSITION ERROR RELATED TO TIMING |
51 | 00 | ERASE FAILURE |
52 | 00 | CARTRIDGE FAULT |
53 | 00 | MEDIA LOAD OR EJECT FAILED |
53 | 01 | UNLOAD TAPE FAILURE |
53 | 02 | MEDIUM REMOVAL PREVENTED |
54 | 00 | SCSI TO HOST SYSTEM INTERFACE FAILURE |
55 | 00 | SYSTEM RESOURCE FAILURE |
55 | 01 | system buffer full |
55 | 02 | insufficient reservation resources |
55 | 03 | insufficient resources |
55 | 04 | insufficient registration resources |
55 | 05 | insufficient access control resources |
55 | 06 | auxiliary memory out of space |
57 | 00 | UNABLE TO RECOVER TABLE-OF-CONTENTS |
58 | 00 | GENERATION DOES NOT EXIST |
59 | 00 | UPDATED BLOCK READ |
5A | 00 | OPERATOR REQUEST OR STATE CHANGE INPUT (UNSPECIFIED) |
5A | 01 | OPERATOR MEDIUM REMOVAL REQUEST |
5A | 02 | OPERATOR SELECTED WRITE PROTECT |
5A | 03 | OPERATOR SELECTED WRITE PERMIT |
5B | 00 | LOG EXCEPTION |
5B | 01 | THRESHOLD CONDITION MET |
5B | 02 | LOG COUNTER AT MAXIMUM |
5B | 03 | LOG LIST CODES EXHAUSTED |
5C | 00 | RPL STATUS CHANGE |
5C | 01 | SPINDLES SYNCHRONIZED |
5C | 02 | SPINDLES NOT SYNCHRONIZED |
5D | 00 | drive operation marginal, service immediately |
5D | 01 | media failure prediction threshold exceeded |
5D | 02 | LUN failure prediction threshold exceeded |
5D | 03 | spare area exhaustion prediction threshold exceeded |
5D | 10 | hardware impending failure general hard drive failure |
5D | 11 | HARDWARE IMPENDING FAILURE DRIVE ERROR RATE TOO HIGH |
5D | 12 | HARDWARE IMPENDING FAILURE DATA ERROR RATE TOO HIGH |
5D | 13 | HARDWARE IMPENDING FAILURE SEEK ERROR RATE TOO HIGH |
5D | 14 | HARDWARE IMPENDING FAILURE TOO MANY BLOCK REASSIGNS |
5D | 15 | HARDWARE IMPENDING FAILURE ACCESS TIMES TOO HIGH |
5D | 16 | HARDWARE IMPENDING FAILURE START UNIT TIMES TOO HIGH |
5D | 17 | HARDWARE IMPENDING FAILURE CHANNEL PARAMETRICS |
5D | 18 | HARDWARE IMPENDING FAILURE CONTROLLER DETECTED |
5D | 19 | HARDWARE IMPENDING FAILURE THROUGHPUT PERFORMANCE |
5D | 1A | HARDWARE IMPENDING FAILURE SEEK TIME PERFORMANCE |
5D | 1B | HARDWARE IMPENDING FAILURE SPIN-UP RETRY COUNT |
5D | 1C | HARDWARE IMPENDING FAILURE DRIVE CALIBRATION RETRY COUNT |
5D | 20 | controller impending failure general hard drive failure |
5D | 21 | CONTROLLER IMPENDING FAILURE DRIVE ERROR RATE TOO HIGH |
5D | 22 | CONTROLLER IMPENDING FAILURE DATA ERROR RATE TOO HIGH |
5D | 23 | CONTROLLER IMPENDING FAILURE SEEK ERROR RATE TOO HIGH |
5D | 24 | CONTROLLER IMPENDING FAILURE TOO MANY BLOCK REASSIGNS |
5D | 25 | CONTROLLER IMPENDING FAILURE ACCESS TIMES TOO HIGH |
5D | 26 | CONTROLLER IMPENDING FAILURE START UNIT TIMES TOO HIGH |
5D | 27 | CONTROLLER IMPENDING FAILURE CHANNEL PARAMETRICS |
5D | 28 | CONTROLLER IMPENDING FAILURE CONTROLLER DETECTED |
5D | 29 | CONTROLLER IMPENDING FAILURE THROUGHPUT PERFORMANCE |
5D | 2A | CONTROLLER IMPENDING FAILURE SEEK TIME PERFORMANCE |
5D | 2B | CONTROLLER IMPENDING FAILURE SPIN-UP RETRY COUNT |
5D | 2C | CONTROLLER IMPENDING FAILURE DRIVE CALIBRATION RETRY COUNT |
5D | 30 | data channel impending failure general hard drive failure |
5D | 31 | DATA CHANNEL IMPENDING FAILURE DRIVE ERROR RATE TOO HIGH |
5D | 32 | DATA CHANNEL IMPENDING FAILURE DATA ERROR RATE TOO HIGH |
5D | 33 | DATA CHANNEL IMPENDING FAILURE SEEK ERROR RATE TOO HIGH |
5D | 34 | DATA CHANNEL IMPENDING FAILURE TOO MANY BLOCK REASSIGNS |
5D | 35 | DATA CHANNEL IMPENDING FAILURE ACCESS TIMES TOO HIGH |
5D | 36 | DATA CHANNEL IMPENDING FAILURE START UNIT TIMES TOO HIGH |
5D | 37 | DATA CHANNEL IMPENDING FAILURE CHANNEL PARAMETRICS |
5D | 38 | DATA CHANNEL IMPENDING FAILURE CONTROLLER DETECTED |
5D | 39 | DATA CHANNEL IMPENDING FAILURE THROUGHPUT PERFORMANCE |
5D | 3A | DATA CHANNEL IMPENDING FAILURE SEEK TIME PERFORMANCE |
5D | 3B | DATA CHANNEL IMPENDING FAILURE SPIN-UP RETRY COUNT |
5D | 3C | DATA CHANNEL IMPENDING FAILURE DRIVE CALIBRATION RETRY COUNT |
5D | 40 | servo impending failure general hard drive failure |
5D | 50 | spindle impending failure general hard drive failure |
5D | 60 | firmware impending failure general hard drive failure |
5D | FF | FAILURE PREDICTION THRESHOLD EXCEEDED (FALSE) |
5E | 00 | low power condition active |
5E | 01 | idle condition activated by timer |
5E | 02 | standby condition activated by timer |
5E | 03 | idle condition activated by command |
5E | 04 | standby condition activated by command |
5E | 41 | POWER STATE CHANGE TO ACTIVE |
5E | 42 | POWER STATE CHANGE TO IDLE |
5E | 43 | POWER STATE CHANGE TO STANDBY |
5E | 45 | POWER STATE CHANGE TO SLEEP |
5E | 47 | POWER STATE CHANGE TO DEVICE CONTROL |
60 | 00 | LAMP FAILURE |
61 | 00 | VIDEO ACQUISITION ERROR |
61 | 01 | UNABLE TO ACQUIRE VIDEO |
61 | 02 | OUT OF FOCUS |
62 | 00 | SCAN HEAD POSITIONING ERROR |
63 | 00 | END OF USER AREA ENCOUNTERED ON THIS TRACK |
64 | 00 | ILLEGAL MODE FOR THIS TRACK |
64 | 01 | INVALID PACKET SIZE |
65 | 00 | voltage fault |
66 | 00 | automatic document feeder cover up |
66 | 02 | DOCUMENT JAM IN AUTOMATIC DOCUMENT FEEDER |
67 | 00 | configuration failure |
67 | 01 | configuration of incapable LUNs failed |
67 | 02 | add LUN failed |
67 | 03 | modification of LUN failed |
67 | 04 | exchange of LUN failed |
67 | 05 | remove of LUN failed |
67 | 06 | attachment of LUN failed |
67 | 07 | creation of LUN failed |
67 | 08 | assign failure occurred |
67 | 09 | multiply assigned LUN |
67 | 0A | set target port groups command failed |
68 | 00 | logical unit not configured |
69 | 00 | data loss on logical unit |
69 | 01 | multiple LUN failures |
69 | 02 | parity/data mismatch |
6A | 00 | informational, refer to log |
6B | 00 | state change has occured |
6B | 01 | redundancy level got better |
6B | 02 | redundancy level got worse |
6C | 00 | rebuild failure occured |
6D | 00 | recalculate failure occured |
6E | 00 | command to logical unit failed |
6F | 00 | copy protect key exchange failure authentication failure |
6F | 01 | copy protect key exchange failure key not present |
6F | 02 | copy protect key exchange failure key not established |
6F | 03 | read of scrambled sector without authentication |
6F | 04 | media region code is mismatched to LUN region |
6F | 05 | drive region must be permanent/region reset count error |
6F | 06 | INSUFFICIENT BLOCK COUNT FOR BINDING NONCE RECORDING |
6F | 07 | CONFLICT IN BINDING NONCE RECORDING |
70 | - | decompression exception short algorithm id of ASCQ |
71 | 00 | decompression exception long algorithm id |
72 | 00 | session fixation error |
72 | 01 | session fixation error writing lead-in |
72 | 02 | session fixation error writing lead-out |
72 | 03 | session fixation error - incomplete track in session |
72 | 04 | empty or partially written reserved track |
72 | 05 | no more track reservations allowed |
73 | 00 | cd control error |
73 | 01 | power calibration area almost full |
73 | 02 | power calibration area is full |
73 | 03 | power calibration area error |
73 | 04 | program memory area update failure |
73 | 05 | program memory area is full |
73 | 06 | rma/pma is almost full |
74 | 00 | SECURITY ERROR |
74 | 01 | UNABLE TO DECRYPT DATA |
74 | 02 | UNENCRYPTED DATA ENCOUNTERED WHILE DECRYPTING |
74 | 03 | INCORRECT DATA ENCRYPTION KEY |
74 | 04 | CRYPTOGRAPHIC INTEGRITY VALIDATION FAILED |
74 | 05 | ERROR DECRYPTING DATA |
74 | 71 | LOGICAL UNIT ACCESS NOT AUTHORIZED |
80 | 00 | First Destination Element Empty. |
80 | 01 | Handler Full |
80 | 03 | Source Magazine not installed |
80 | 04 | Destination Magazine not installed |
80 | 05 | Source Drive not installed |
80 | 06 | Destination Drive not installed |
80 | 07 | I/O PORT ACCESS OR IMPORT PROHIBITED BY CONFIGURATION |
Copyright (C) 2008 Solarisでいきましょか? All rights reserved